The TNNSER 3D Supports Variety of Razor Handles

I found that I can use a variety of handles with the TNNSER 3D razor by using a 10-32 x 1/2 screw.

Edwin Jagger Handle

RR Black Hawk Handle

SS Fat Handle

Gillette Tech Handle

PAA Slant Bakelite Handle

Wood Fatboy Handle

Wooden Cartridge Handle

Shave of the Day - 8/31

Cold Water Rinse

Proraso Sandalwood 

Jayaruh #144

Rocket 5/8

CWR

Florida Water

My prep was just a cold water rinse. The Proraso Sandalwood Shaving Soap face lathered well with the Jayaruh #144 Brush. I did the first pass with the Rocket 5/8 razor and a clean up pass with my new TNNSER 3D razor and ended up with a close, comfortable shave. After a cold water rinse, I finished off with Florida Water. I am clean, smooth, and refreshed...

Box 24 for TNNSER 3D Razor

I am purposing this A.C. Moore's box for my new TNNSER 3D razor. The following pictures were taken after I had stained the wood, added the clasp, and lined the inside. Next, I will add the polycrylic finish.

Update: All done. I put two coats of polycrylic on the box to protect it. Then I put four felt feet on the corners to keep it off the surface and protect it.

Shave of the Day - 8/30

Cold Water Rinse

Proraso Sandalwood 

Jayaruh #144

TNNSER 3D

CVS CS SE

CWR

Florida Water 

My prep was just a cold water rinse. The Proraso Sandalwood Shaving Soap face lathered well with the Jayaruh #144 Brush. I did two passes with the TNNSER 3D Razor with a CVS CS SE Blade and ended up with a close, comfortable shave. After a cold water rinse, I finished off with Florida Water. I am clean, smooth, and refreshed...

Here is the video.

The TNNSER 3D Razor

The original TNNSER razor, created by Tom White, was made of aluminum. It travelled the world before ending up at my house until it will be passed on after I pass on.  Andreas of the UK took the razor and made a 3d printed version of it. It got tweaked and Tom also had a razor printed.

Andreas shared the files with me, and I looked for a printer. I found a guy here in Henderson County. Arrowood Mechanical Designs felt they could print it for me. So, I went over to meet with Bill and talk about the razor. I decided to go ahead with a test razor. I did not sleep well that night. I was at his door at 8 AM the next morning, and he had the razor ready. I wrote the following later that morning.

I just got the TNNSER 3D razor from the 3D printer today. It is created by Tom of Burbank and Andreas of UK. I had to get a flat head screw and a nut to hold the head on the handle. The nut was a little thick, so I took it down to size with my Dremel. Here it is, folks. I look forward to shaving with this awesome single edge razor.

Weighs in at 19g.

I created this video to share with the TOST forum and the world.

Shave of the Day - 8/29

Cold Water Rinse

Proraso Sandalwood 

Jayaruh #144

Gillette Double Ring

Gillette Silver Blue

CWR

Florida Water

My prep was just a cold water rinse. The Proraso Sandalwood Shaving Soap face lathered well with the Jayaruh #144 Brush. I did two passes with the Gillette Double Ring Razor with a Gillette Silver Blue Blade and ended up with a close, comfortable shave. After a cold water rinse, I finished off with Florida Water. I am clean, smooth, and refreshed...

Shave of the Day - 8/28

Cold Water Rinse

Williams Mug Shaving Soap

Jayaruh #144

Enders Speed Razor

Enders Speed Blade

CWR

Florida Water 

My prep was just a cold water rinse. The Williams Mug Shaving Soap face lathered well with the Jayaruh #144 Brush. I did two passes with the Enders Speed Razor with an Enders Speed Blade and ended up with a close, comfortable shave. After a cold water rinse, I finished off with Florida Water. I am clean, smooth, and refreshed...

Shave of the Day - 8/27

Cold Water Rinse

Tabac Shave Soap

Jayaruh #144

Gillette Double Ring

Gillette Silver Blue

CWR

Tabac AS

My prep was just a cold water rinse. The Tabac Shave Soap face lathered well with the Jayaruh #144 Brush. I did two passes with the Gillette Double Ring Razor with a Gillette Silver Blue Blade and ended up with a close, comfortable shave. After a cold water rinse, I finished off with Tabac AS. I am clean, smooth, and refreshed...

Stropping an Enders Speed Blade

Because the Enders Speed Blade was a bit tuggy in today's shave, I decided to strop it to see if I could improve its performance. Here is what I did.

Shave of the Day - 8/26

Cold Water Rinse

C.O. Bigelow Shave Cream

Jayaruh #144

Enders Speed Razor

Enders Speed Blade

CWR

Osage Rub

My prep was just a cold water rinse. The C.O. Bigelow Shave Cream face lathered well with the Jayaruh #144 Brush. I did two passes with the Enders Speed Razor with an Enders Speed Blade and ended up with a close, comfortable shave. After a cold water rinse, I finished off with Osage Rub. I am clean, smooth, and refreshed...

Shave of the Day - 8/25

Cold Water Rinse

Palmolive Shaving Cream

Jayaruh #206

J.A. Henckels

J.A. Henckels Wedge

CWR

English Leather AS

My prep was just a cold water rinse. The Palmolive Shaving Cream face lathered well with the Jayaruh #206 Brush. I did two passes with the J.A. Henckels Lather Catcher razor with a J.A. Henckels Wedge Blade and ended up with a close, comfortable shave. After a cold water rinse, I finished off with English Leather AS. I am clean, smooth, and refreshed...

Shave of the Day - 8/24

Cold Water Rinse

Palmolive Shaving Cream

Jayaruh #206

H. Böker 5/8

CWR

English Leather AS

My prep was just a cold water rinse. The Palmolive Shaving Cream face lathered well with the Jayaruh #206 Brush. I did two passes with the H. Böker 5/8 and ended up with a close, comfortable shave. After a cold water rinse, I finished off with English Leather AS. I am clean, smooth, and refreshed...

Shave of the Day - 8/23

Cold Water Rinse

Palmolive Shaving Cream

Jayaruh #206

TNNSER

CVS CS

CWR

English Leather AS

My prep was just a cold water rinse. The Palmolive Shaving Cream face lathered well with the Jayaruh #206 Brush. I did two passes with the TNNSER razor with a CVS CS SE Blade and ended up with a close, comfortable shave. After a cold water rinse, I finished off with English Leather AS. I am clean, smooth, and refreshed...

Shave of the Day - 8/22

Cold Water Rinse

Palmolive Shaving Cream

Jayaruh #206

Gillette New Standard

Gillette Silver Blue

CWR

English Leather AS

My prep was just a cold water rinse. Palmolive Shaving Cream face lathered well with the Jayaruh #206 Brush. I did two passes with the Gillette New Standard razor with a Gillette Silver Blue Blade and ended up with a close, comfortable shave. After a cold water rinse, I finished off with English Leather AS. I am clean, smooth, and refreshed...

Knotting and Re-knotting

I got two handles, a brush, and three knots in the mail today. I am doing a little job for a fellow shaver. It started out as a re-knot for JR#41, but he asked if I would set the knots in two other handles he had. Of course, I said yes. The first two pictures show the two handles with their respective knots "dry fitted."

Here are the three brush handles with their respective knots. I had to remove the old badger knot from #41. I replaced it with a Maggard two-band badger.

Here they are awaiting their final setting. I am using hot glue to set the knots. 

Here they are all done. I will send them back to Perry tomorrow.

Maggard two-band fan

Maggard black and white synthetic

Jayaruh #41 with new Maggard two-band badger.